TK 6000
2 X 1800W Class H, Audio Power Amplifier
Product at a Glance
The TK 6000 is a robust 2-channel amplifier built for professional touring and high-performance installations. With output power scaling up to 1800W per channel at 4Ω and 3500W bridged at 4Ω, it delivers consistent, distortion-free power across the full frequency spectrum. A >400 damping factor and input CMRR > 60 dB ensure tight control and high fidelity even at peak output, while protection systems against DC faults and short circuits maintain operational stability.
Featuring XLR signal input/output, rotary gain control, and LED metering, the TK 6000 offers intuitive front-panel management. The rugged black aluminum chassis and matte white panel enhance thermal performance and visual uniformity in rack installations. Optimized for 2Ω loads and equipped with onboard signal limiting and in-rush current protection, this amplifier is a reliable solution for powering subs, line arrays, and full-range systems under the rigors of professional use.
CRAFTSMANSHIP
Painstakingly Perfect Production
Over the years, craftsmanship has been closely linked with small scale individualistic production. Back in 1972, we started the same way. As we grew in scale & size, it was difficult to build each speaker individually, but quality control was of utmost importance as so switching to a general assembly line was simply not an option. So we wrote up a code, one quite like enigma, to ensure quality control. We selected the right partners, got the right tools, and in cases where those weren't available, we invented them. We grew slower than most as our aim was to last longer than most.
TECHNICAL SPECIFICATIONS
OUTPUT POWER
• 2 Output Channels
• 1000W/ Ch @ 8Ω
• 1800W / Ch @ 4Ω
• 1800W / Ch @ 2.7Ω
• 1800W / Ch @ 2Ω
• 2500W / Ch @ 8Ω Bridged
• 3500W / Ch @ 4Ω Bridged
AMPLIFIER INPUTS
• 2 x Analogue Inputs
AMPLIFIER OUTPUT
• 2 Link Outputs
• 2 Power Outputs
CONNECTORS
• XLR Connectors for Signal Input and Link
Output
• Speak-on and Binding Post Connectors for
Channel Outputs
SYSTEM
SPECIFICATIONS
• Input CMRR > 60 dB
• Freq. resp.: 20Hz - 20kHz ±3dB
• THD : better than 0.18% (1 kHz)
• THD : better than 0.2% (FR)
• Nominal system gain: 32 dB
• Input Impedance — 20kΩ
• >400 Damping Factor, 1kHz, 8Ω
• Signal Limiters Present
• Protection Against Short Cicrcuit & DC
Outputs Peak Limiting
• Mains In-rush Control present
CONTROLS &
MONITORING
• LED Strip for Output Metering
• Toggle Switches for Sensitivy Selection,
Input Mode Selection, LPF & Ground
• Rotary Knobs for Channel Volume
POWER CONSUMPTION
• 5A Power Consumption, Nominal @ 240V, 4 Ohms
• 10.4A Power Consumption, Nominal @ 120V, 4 Ohms
• See Power Consumption & Thermal Emission Chart for a detailed specification
OPERATING PARAMETERS
• Operating positions : To be used in a
rack-mount case with no front to back airflow
restriction
• Maximum permitted ambient temperature
(Ta max) 45° C (113° F)
• Minimum permitted ambient temperature
(Ta min): 0° C (32° F)
• 32 dB Fan Noise
AESTHETIC SPECIFICATIONS
• White Aluminum Chassis
• Matte Star Silver Front Pane
SIZE
• Product : 88 x 482 x 458 mm (H x W x D)
• Product : 3.4 x 19 x 18 inch (H x W x D)
• Packed individually
WEIGHT
• Net : 11 Kgs
• Net : 24.2 Lbs
SHIPPING INFORMATION
• Carton Size
163 x 556 x 533 mm (H x W x D)
6 x 22 x 21 inch (H x W x D)
• Gross Weight : 13 Kgs / 28.7 Lbs
• Packed : Individually
DOWNLOADS CENTRE
Datasheet
